تمرکز بر شرایط لرزه‌خیزی دشت‌ها جهت مکان‌یابی احداث شهرک‌های صنعتی (مورد مطالعه: دشت‌های استان فارس)

نوع مقاله : مقاله پژوهشی

نویسنده

دانشیار، گروه مدیریت، واحد شیراز، دانشگاه آزاد اسلامی، شیراز، ایران

چکیده

چکیده
احداث یک یا چند واحد صنعتی در مکان‌های بهینه و در بهترین وضعیت ممکن، نه تنها گردش مواد و خدمات به مشتریان را بهبود می‌بخشد، بلکه کارخانه را در وضعیت مطلوب قرار می‌دهد و تصمیم‌های مرتبط با انتخاب و فراگیری ویژگی‌های مکان یابی یک مرکز می‌تواند اثر بزرگی بر توانایی کسب و حفظ مزیت رقابتی باشد. هدف این پژوهش تمرکز بر شرایط لرزه‌خیزی دشت‌ها جهت مکان‌یابی احداث شهرک‌های صنعتی در پهنه استان فارس می‌باشد. روش پژوهش بر اساس هدف کاربردی و توصیفی-پیمایشی است. جهت تجزیه و تحلیل دادهها از روش تحلیل سلسله مراتبی فازی با روش چانگ استفاده شده است. این تحقیق در پی آن است که دشت‌های مستعد جهت احداث شهرک‌های صنعتی را در فارس انتخاب نموده و با استفاده از روش فازی اقدام به انتخاب بهترین مکان(دشت) با توجه به معیارهای تعیین شده جهت احداث یک شهرک صنعتی نماید. در ابتدا با مطالعه پیشینه موضوع پژوهش،مصاحبه با خبرگان واستفاده از ادبیات نظری، 42 شاخص انتخاب شده و از طریق توزیع پرسشنامه اقدام به استخراج پنج معیار پر اهمیت به همراه درجه اهمیت آن‌ها نسبت به هدف پژوهش گردید. مجددا از طریق ابزار پرسشنامه اقدام به تعیین اوزان نسبی معیار‌ها نسبت به هر کدام از گزینه‌ها گردید. شاخص‌های انتخاب شده شامل، فاصله با گسلهای عظیم، سابقه بزرگی رخداد زلزلهها، سابقه عمق کانونی رخداد زلزلهها، فاصله دسترسی به شبکه حمل ونقل عمومی ومیزان فاصله با ذخایرمعدنی موجود در همسایگی میباشند. نتایج پژوهش نشان داد که با توجه به معیارهای انتخابی به ترتیب دشت سپیدان، دشت شیراز، دشت کازرون، دشت لارستان و نهایتا دشت آباده بهترین مکانها میباشد. 

کلیدواژه‌ها


عنوان مقاله [English]

Focus on the seismic conditions of the plains to locate the construction of industrial estates (Case study: plains of Fars province)

نویسنده [English]

  • hassan soltani
Associate Professor, Department of Management, Shiraz Branch, Islamic Azad University, Shiraz, Iran
چکیده [English]

Abstract
The construction of one or more industrial units in optimal locations and in the best possible condition, not only improves the circulation of materials and customer service, but also puts the factory in a favorable position and makes decisions related to selection and learning. The location characteristics of a center can have a major impact on the ability to gain and maintain a competitive advantage. The purpose of this study is to focus on the seismic conditions of the plains to locate the construction of industrial estates in Fars province. The research method is based on applied and descriptive-survey purpose. For data analysis, fuzzy hierarchical analysis method with Chang method has been used. This research seeks to select the plains prone to the construction of industrial estates in Fars and using the fuzzy method to select the best location (plain) according to the criteria set for the construction of an industrial estate. First, by studying the background of the research topic, interviewing experts and using theoretical literature, 42 indicators were selected and by distributing a questionnaire, five important criteria were extracted along with their degree of importance to the purpose of the research. The relative weights of the criteria for each of the options were determined again through the questionnaire tool. Selected indicators include distance to massive faults, large history of earthquakes, history of focal depth of earthquakes, distance to public transportation network, and distance to mineral reserves in the neighborhood. The results showed that according to the selected criteria, Sepidan plain, Shiraz plain, Kazerun plain, Larestan plain and finally Abadeh plain are the best places, respectively. 
 
Extended Abstract
 
Introduction
The construction of one or more industrial units in optimal locations and in the best possible condition, not only improves the circulation of materials and customer service, but also puts the factory in a favorable condition. Decisions related to the selection and acquisition of a center's location characteristics can have a major impact on the ability to gain and maintain a competitive advantage (Jun Zhuang, Xiaojun Shan, 2013). Percentage of them go bankrupt in the first year and about 30% in the second year and move on to another job. (Hashemi & Hassanloo, 2010) Performing location studies correctly in addition to the economic impact on the performance of the industrial unit, social effects, environment Biological, cultural and economic in the region where it is built, in addition, regional characteristics are also considered as key factors in determining the location in location issues (Abdi, Jahanshiri & Alavi, 2012). And the position of industrial estates in improving the situation of production, employment, creating national income and attracting domestic and foreign capital, optimal use of domestic and foreign resources and facilities, training and upgrading resources Humanity, attracting appropriate technology and paying attention to the problems of bottlenecks in industrial estates have the advantage. In most of the researches, both foreign and domestic, regarding the bottlenecks and problems of industrial estates, factors such as weak investment, problems in the administrative system, lack of comprehensive support of relevant officials and weak community culture are introduced as important factors. But the fact is that the location of industrial estates can be examined from the economic, financial, educational and .... One of the most important factors and perspectives that should be considered is resistance to seismic hazard as well as strategic strategic mineral resources. Attention to this important, research in this field is one of the issues that need to be studied in the rich and rich area of Fars province due to the seismicity of this area and the location of industrial towns is one of the most important issues in creating and road Is the establishment of these centers. Because by choosing a correct place, many problems and problems that will appear in the future can be eliminated and a fundamental solution can be chosen to solve the problems. There are many items to consider in this regard that are involved in the success of the project to create industrial estates in the discussion of the initial location of the construction, but the focus of this project is on seismicity and strategic vision of various industries. . Therefore, in this research, the main question is how to prioritize the selected plains of Fars province for the construction of industrial towns according to seismicity criteria?
 
Methodology
This research is based on an applied purpose and in terms of descriptive-survey execution technique. The statistical population consists of scientific and practical experts in the field of geology, mining and industry, whose scientific and practical background is a combination of three cases. The number of experts with the announced conditions is equal to 30 in Fars province, so using the census method, a survey of 30 experts was conducted. In this study, two series of researcher-made questionnaires have been used. The first questionnaire was prepared to determine the criteria and their importance in relation to each other and the second questionnaire was prepared to determine the importance of each of the criteria in relation to the options. In both questionnaires, a spectrum consisting of five levels of importance was used to determine the reliability of researcher-made questionnaires using Cronbach's alpha coefficient. The obtained Cronbach's alpha indicates that the questions have a good correlation and can be stated. That the proposed propositions all measure a variable. In 1992, Chang proposed a very simple way to extend the process of hierarchical analysis to fuzzy space. This method, which was based on the arithmetic mean of expert opinions and the hourly normalization method and developed using fuzzy triangular numbers, was welcomed by researchers.
 
Results and Discussion
Considering the importance and position of industrial towns in improving the situation of production, employment, creating national income and attracting domestic and foreign capital, optimal use of domestic and foreign resources and facilities, training and upgrading human resources, attracting appropriate technology and attention It is necessary to the problems and bottlenecks of industrial estates. The location of industrial estates is one of the important factors in planning for the construction of these estates. Establishment of industrial units leads to economic growth, better distribution, reduction of regional disputes, and so on. The results showed that the most important criteria for locating industrial estates are: Distance with huge faults, Large history of earthquakes, History of focal depth of earthquakes, Distance to public transport network, The distance to the mineral reserves in the neighborhood, Prioritize each of the factors affecting the selection of a suitable location with fuzzy logic as follows: in order of number from most important to least important are: Distance with huge faults, Large history of earthquakes, History of focal depth of earthquakes, Distance to public transport network, The distance to the mineral reserves in the neighborhood
 
Conclusion
Industrial estates are one of the most important strengths or weaknesses of a region and with the development of industry and industrial estates, technology is increasing day by day. Therefore, considering that the highest trade income in the world is the trade of information and technology, so special attention should be paid to this point, ie increasing industrial estates at the national and provincial levels.

کلیدواژه‌ها [English]

  • Location
  • industrial towns
  • seismic plains
  1. References

    1. Abdi, A., Jahanshiri, H., & Alavi, M. (2012). Built CNG fuel stations using Geographic Information System (GIS) and multi-criteria evaluation method of AHP: Case study, Rasht. Ninth International Congress on Civil Engineering, Isfahan University of Technology. [In Persian]
    2. Adib, A., & Zare, M. (2016). Seismic zoning of East Stan Yazd based on earthquakes and Quaternary faults using fractal modeling. Advanced Applied Geological Journal, (10). [In Persian]
    3. Agha Mohammadi Zanjirabad, H., Afshari, S., & Nouri, M. R. (2016). Extraction of geological faults using remote sensing data: Case study of Kopeh Dagh in the north of North Khorasan province. [In Persian]
    4. Amin Naseri, M. R., & Zafarani, H. (2016). Seismic data modeling using clustering to predict earthquakes. Sharif Civil Engineering Quarterly, 32(2), 29-37. [In Persian]
    5. Bahri, A., & Khosravi, Y. (2018). Application of spatial statistics tools in ArcGIS software in environmental sciences. Journal of Mapping Engineering and Environmental Information, 9(3). [In Persian]
    6. Chen, R., & Zadi, L. A. (2013). Decision-making in fuzzy environments. Management Science, 17, 141-164.
    7. Fal Suleiman, M., Haj Yapour, M., & Jamshidi, K. (2012). Vulnerability of physical elements of rural settlements in earthquake-prone areas: Example, Qaenat and Zirkuh counties. Geographical Spatial Planning Journal, 2(6). [In Persian]
    8. Fesellmyer, K. (2013). Strategic exploitation of a common resource under environmental risk. Retrieved from http://www.sciencedirect.com/ [Accessed Mehr 15, 1392]. [In Persian]
    9. Frick, M., Axhausen, K. W., Carle, G., & Wokaun, A. (2007). Optimization of the distribution of compressed natural gas (CNG) refueling stations: Swiss case studies. Transportation Research Part D, 10-22.
    10. Gholizadeh, M. H., Shahabi, H., & Nairi, H. (2010). Earthquake risk zoning by multi-criteria spatial analysis method. Journal of Geography and Development, (17). Zahedan: Sistan and Baluchestan University Press. [In Persian]
    11. Hashemi, S. N., & Hassanloo, A. (2010). Spatial-temporal analysis of the interaction of seismic faults in the middle part of the Zagros region. Journal of Advanced Applied Geology, 1(2). [In Persian]
    12. Jamali, F., Sadr Mousavi, M. S., & Ashlaghy, M. (2012). Introduction to locating and design of hospitals. Journal of Hospital, (2), 87-97. [In Persian]
    13. Jamshidi, A. R. (2012). Assessment of the impacts of industrial towns on the development of surrounding rural areas. Retrieved from http://www.sid.ir/archive/ [Accessed Aban 08, 1392]. [In Persian]
    14. Karam, A. (2013). Using weighted linear combination model (WLC) for landslide zoning in the Sarkhun region, Chaharmahal and Bakhtiari province. Journal of Geography. [In Persian]
    15. Maliki, F. (2018). The basics of seismic zoning and seismic hazard analysis methods. [In Persian]
    16. Matkan, A. A., Shakhiba, A., Poor, A. S. H., & Nazmfar, H. (2012). Locating suitable sites for landfills using GIS: Study area, the city of Tabriz. Journal of Environmental Sciences, (2), 121-132. [In Persian]
    17. Moalem, M., & Zahedi, M. (2010). Evaluation of economic projects. Payam-e Noor University Press. [In Persian]
    18. Pour Mohammadi, M. R. (2009). Assessment of educational land use locating for the city of Shahrood. Journal of Geographical Space, 10(1), 1-27. [In Persian]
    19. Razavian, M. T. (2007). Site selection of industrial firms: A discussion in spatial economics. Ahvaz: Azad University. [In Persian]
    20. Shirani, H. (2014). Organize location. Tehran: Publication Knowledge Creating. [In Persian]
    21. Tatar, M. (2011). Induced seismicity in Masjed Soleyman reservoir (southwest of Iran). Retrieved from http://www.sid.ir/archive/ [Accessed Aban 08]. [In Persian]
    22. Zangiabadi, A., & Tabrizi, N. (2015). Tehran earthquake and spatial assessment of urban areas. Geographical Research, 38(56), Summer 2016. [In Persian]
    23. Zhuang, J., & Shan, X. (2013). Hybrid defensive resource allocations in the face of partially strategic attackers in a sequential defender–attacker game.